Orbital Mekatronik Systems Private Limited
Pimplas Village, Bhiwandi, Thane, Maharashtra
GST No. 27AACCO4276F1ZE
TrustSEAL Verified
Call 0804898108179% Response Rate
SEND EMAIL
Product Details:
| Supply Voltage | 12V to 24V DC+-10% |
| Brand | Orbital |
| Measuring Center Distance | 100 mm |
| Detection Range | +-35mm |
| Repeatability Accuracy | 70 m |
| Consumption Current | Lower than 40mA |
| Reaction Time | 1.5 ms |
| Enclosure Rating | IP67(IEC) |
| Model | NPN output | LC-S100N | LC-S100MN | LC-S400N | LC-S400MN |
| PNP output | LC-S100P | LC-S100MP | LC-S400P | LC-S400MP | |
| Measuring Center Distance | 100mm | 400mm | |||
| Detection range | ±35mm | ±200mm | |||
| Repeatability accuracy | 70μm | 300μm(Measug distance 200mm - 400mm) 800μm(Measuring distance 400mm - 600mm) |
|||
| Linearity | ±0.1%F.S. | ±0.2%F.S.(Measuring distance 200mm - 400mm) ±0.2%F.S.(Measuring distance 400mm - 600mm) |
|||
| Temperature characteristic | 0.03%F.S./°C | ||||
| Light source | Red laser, calss 2, Max. output:1mW,Wavelength of light-emitting beam: 655nm | ||||
| Beam diameter | about φ120μm | about φ500μm | |||
| Supply voltage | 12V to 24V DC±10% Ripple P -- P10% | ||||
| Consumption current | Lower than 40mA (Power supply voltage 24V DC), Lower than 60mA (Power supply voltage 12V DC) | ||||
| Control output | Max. load current: 50mA Light ON/, Dark ON, Switchable | ||||
| Short circuit protection | Provide with (automatic recovery type) | ||||
| Analog output | Output range: 0V-5V(Alarm 5.2V) Output impedance:100Ω | ||||
| Reaction time | 1.5ms/5ms/10ms Switchable | ||||
| External input | NPN without contact input, valid: 0V to + 1.2V DC input impedance: 10KΩ | ||||
| Enclosure rating | IP67(IEC) | ||||
| Cable | 2M Composite Cable with 0.15mm*5 Core | ||||
| Housing | Body Shell: Aluminum Castings, Front Cover: Propylene | ||||
Product Details:
| Brand | IDEC |
| Model Name/Number | SA1E |
| Power Voltage | 12 to 24V DC |
| Sensing Range | 20m |
| Operating Humidity | 35 to 85% RH |
| Storage Temperature | -40 Deg C To 70 Deg C |
| Degree of Protection | IP67 |
Designed to function consistently over time and tolerate harsh industrial environments, SA1E laser photoelectric sensors are assembled using precise robotic technology to produce a reliable, accurate and durable product.Competitively priced, these sensors are also easy to install and incorporate numerous features in a compact housing. A choice of NPN or PNP outputs are available, as well as Dark ON or Light ON operation modes, and all SA1E sensors are IP67 rated, UL/c-UL listed and CE marked.
Features:
Product Details:
| Brand | IDEC |
| Model Name/Number | SA1E |
| Power Voltage | 12 to 24V DC |
| Sensing Range | 20 m |
| Degree of Protection | IP67 |
| Operating Humidity | 35 to 85% RH |
| Weight | Approx 30g |
| Operating Temperature | -25 Deg C to +55 Deg C |
Designed to function consistently over time and tolerate harsh industrial environments, SA1E photoelectric sensors are assembled using precise robotic technology to produce a reliable, accurate and durable product. Available in seven different optical functions, there’s an SA1E sensor for every application.Competitively priced, these sensors are also easy to install and incorporate numerous features in a compact housing. A choice of NPN or PNP outputs are available, as well as Dark ON or Light ON operation modes, and all SA1E sensors are IP67 rated, UL/c-UL listed and CE marked.
Features:
Product Details:
| Usage/Application | Industrial |
| Model Name/Number | T2S-U10NC |
| Brand | Orbital |
| Weight | Approx 55 G |
| Frequency | 50/60Hz 1min |
| Voltage | 12~24V DC |
| Sensing Distance | 10mm |
| Current Consumption | Max 20 mA |
| Response Time | Max 1 ms |
| Dielectric Strength | AC 500 V |
| Degree of Protection | IEC-IP64 |
| Type | T2S-U10NC | T2S-U15NC | ||
| Sensing distance | 10mm | 15mm | ||
| Minimum detectable object | Opaque???0.5x10mm | |||
| Light source(wavelength) | Infrared LED(940nm) | |||
| Voltage | 12~24V DC | |||
| Current consumption | 20mA max. | 25mA max. | ||
| Response time | 1ms max. at DC24V | |||
| Control output | NPN | Black wire???N.O.(Dark-ON) White wire???N.C.(Light-ON) | ||
| Ambient illumination | Sunlight / Incandescent lamp???1000lx max. | |||
| Ambient temperature | Operating:-10~+55???, Storage:-25~+70???(with no icing or condensation) | |||
| Ambient humidity | Operating:48~85%RH, Storage:48~95%RH(with no condensation) | |||
| Insulation resistance | 20MΩ min.(DC500V) | |||
| Dielectric strength | AC500V 50/60Hz 1min | |||
| Vibration resistance | Destruction | 10~500Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | ||
| Shock resistance | Destruction | 500m/s2 10 times each X,Y and Z directions | ||
| Degree of protection | IEC-IP64 | |||
| Material | Case | PC | ||
| Weight | Approx:55g | |||
Product Details:
| Usage/Application | Industrial |
| Model Name/Number | T3P-TN152 |
| Brand | Orbital |
| Voltage | 10.8~26.4V DC |
| Sensing Distance | 1.5 m |
| Directional Angle | 2~20 Deg C |
| Light Source | Infrared LED |
| Current Consumption | Max 20 mA |
| Response Time | Max 1 ms |
| Load Current | Max 100 mA |
| Operating Temperature | -20 Deg C To 55 Deg C |
| Ambient Humidity | 35~85%RH |
| Insulation Resistance | 20M |
| Degree of Protection | IEC-IP40 |
| Type | T3P-TN152 | T3P-DN031 | |
| Sensing distance | 1.5m | 30mm±5 | |
| Sensing object | Opaque materals:6mm min. | - | |
| Differential travel | - | 25% max. of sensing distance | |
| Directional angle | 2~20° | - | |
| Sensitivity adjustment | - | Lap regulator | |
| Light source(wavelength) | Infrared LED | ||
| Voltage | 10.8~26.4V DC pulse(P-P)±10% max. | ||
| Current consumption | 20mA max. | ||
| Response time | 1ms max. | ||
| Control output | Load power supply voltage: 26.4V DC max. Load current: 100mA max. Load current with a residual voltage: 1V max. |
Load power supply voltage: 26.4V DC max. Load current: 80mA max. Load current with a residual voltage: 1V max. |
|
| Ambient illumination | Sunlight: 10,000lx max.; Incandescent lamp: 3,000lx max. | ||
| Ambient temperature | Operating:-20~+55???, Storage:-40~+70???(with no icing or condensation) | ||
| Ambient humidity | Operating:35~85%RH, Storage:35~85%RH(with no condensation) | ||
| Insulation resistance | 20MΩ min.(DC500V) | ||
| Dielectric strength | AC1,000V 50/60Hz 1min | ||
| Vibration resistance | Destruction | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | |
| Shock resistance | Destruction | 500m/s2 3 times each X,Y and Z directions | |
| Degree of protection | IEC-IP40 | ||
| Protection circuits | Power reverse polarity protection | ||
| Accessories | Mounting Bracket, Screws, Nuts | ||
Product Details:
| Usage/Application | Industrial |
| Material | ABS |
| Model Name/Number | T3E-DL30NA |
| Brand | Orbital |
| Voltage | 5~24V DC |
| Ambient Temperature | -10 Deg C To 55 Deg C |
| Sensing Distance | 30mm+-5mm |
| Light Source | Infrared LED(890nm) |
| Current Consumption | Max 40 mA |
| Response Time | Max 3ms |
| Insulation Resistance | 20M |
| Ambient Humidity | 35~85%RH |
| Degree of Protection | IEC-IP40 |
Product Details:
| Usage/Application | Industrial |
| Material | ABS |
| Model Name/Number | T5A-EAN11 |
| Brand | Orbital |
| Voltage | 12~24V DC |
| Sensing Distance | 150 mm |
| Thickness | 3.5 mm |
| High Speed Reaction Time | 0.5 ms |
| Current Consumption | 10 mA |
| Ambient Humidity | 35-85%RH |
| Degree of Protection | IEC-IP67 |
| Type | T5A-EAN11 | T5A-EBN11 | T5A-EAN13 | T5A-EBN13 | ||
| Sensing distance | 150mm | 300mm | ||||
| Minimum detectable object | Opaque materals:1mm | |||||
| Differential travel | - | |||||
| Light source(wavelength) | Infrared LED(680nm) | |||||
| Voltage | 12~24V DC pulse(P-P)±10% max. | |||||
| Current consumption | Emitter: 10mA max. Receiver: 10mA max. | |||||
| Protection circuits | Short-circuit protection | |||||
| Response time | 0.5ms max. | |||||
| Control output | Load power supply voltage: 30V DC max.; Load current: 50mA max. (Load current with a residual voltage: 2V max.) |
|||||
| Ambient illumination | Incandescent lamp: 5,000lx max. | |||||
| Ambient temperature | Operating: -25~+55???, Storage: -30~+70???(with no icing or condensation) | |||||
| Ambient humidity | Operating: 35~85%RH, Storage: 35~85%RH(with no condensation) | |||||
| Insulation resistance | 20MΩ min.(DC500V) | |||||
| Dielectric strength | AC1,000V 50/60Hz 1min | |||||
| Vibration resistance | Destruction | 10~500Hz 3mm double amplitude for 2 hours each in X,Y and Z directions | ||||
| Shock resistance | Destruction | 500m/s2 s 3 times each X,Y and Z directions | ||||
| Degree of protection | IEC-IP67 | |||||
| Material | Case | Modified polyarylate | ||||
| Sensing surface | Modified polyarylate | |||||
| Accessories | M2x8 screws, Spring gasket, Flat gasket | |||||
Product Details:
| Usage/Application | Industrial |
| Material | ABS |
| Model Name/Number | T4M-T5X1 |
| Brand | Orbital |
| Weight | Approx:420g |
| Voltage | 12~240V DC |
| Ambient Temperature | -25 Deg C To 70 Deg C |
| Insulation Resistance | 20M |
| Ambient Humidity | 45~85%RH |
| Response Time | 30 ms |
| Type | T4M-T5X1 | T4M-T5X2 | T4M-D30X1 | T4M-D30X2 | ||
| Sensing distance | 5m | 300mm | ||||
| Sensing object | Opaque materals:φ14.8mm min. | 100x100mm White paper | ||||
| Voltage | 12~240V DC pulse(P-P)±10% max. 24~240V AC±10% 50/60Hz | |||||
| Leakage current | DC/AC 3W max. | DC/AC 2W max. | ||||
| Operation mode | Light-ON | Light-ON | Dark-ON | |||
| Control output | AC250V(3A max.) DC5V(10mA min.) | |||||
| Differential travel | - | 20% max. of sensing distance | ||||
| Response time | 30ms max. | |||||
| Directional angle | Both Emitter and Receiver:3~20° | - | ||||
| Life expectancy (relay output) | Mechanical???50,000,000 times min.(switching frequency???18,000 times/h) Electrical???100,000 times min.(switching frequency: 1,800 times/h) | |||||
| Light source(wavelength) | Infrared LED(950nm) | |||||
| Ambient illumination | Receiver side Incandescent lamp???3,000lx max. | |||||
| Ambient temperature | Operating:-25~+70???, Storage:-40~+85??? (with no icing or condensation) | |||||
| Ambient humidity | Operating:45~85%RH, Storage:35~95%RH (with no condensation) | |||||
| Insulation resistance | 20MΩ min.(DC500V) | |||||
| Dielectric strength | AC1,500V 50/60Hz 1min | |||||
| Vibration resistance | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | |||||
| Shock resistance | Destruction | 500m/s2 3 times each X,Y and Z directions | ||||
| Malfunction | 100m/s2 3 times each X,Y and Z directions | |||||
| Degree of protection | IEC-IP64 | |||||
| Material | Case | ABS | ||||
| Sensing surface | Methacrylic resin | |||||
| Weight | Approx:420g | Approx:250g | ||||
| Accessories | Mounting Bracket, screws, Nuts | |||||
Product Details:
| Usage/Application | Industrial |
| Model Name/Number | T2A-T1N11 |
| Brand | Orbital |
| Voltage | 12~24V DC |
| Sensing Distance | 1 m |
| Current Consumption | 10 mA |
| Response Time | 1.0 ms |
| Ambient Humidity | 35~95%RH |
| Storage Temperature | -40 Deg C To 70 Deg C |
| Degree of Protection | IEC-IP67a |
| Type | T2A-T1N11 | T2A-T1N21 | T2A-T30N11 | T2A-T30N21 | ||
| Sensing distance | 1m | 300mm | ||||
| Standard sensing object | Opaque:2mm min. | |||||
| Minimum detectable object | Opaque materals: 2mm(reference value) | |||||
| Differential travel | - | |||||
| Directional angle | Receiver: 3~15° Emitter: 3~15° | |||||
| Light source(wavelength) | Infrared LED(650nm) | |||||
| Voltage | 12~24V DC pulse(P-P)±10% max. | |||||
| Current consumption | Emitter:10mA Receiver:20mA | |||||
| Protection circuits | Power supply and control output reverse polarity protection,Output short-circuit protection | |||||
| Response time | 1.0ms max. | |||||
| Control output | Load power supply voltage: 26.4V DC max.; Load current: 50mA max. (Load current with a residual voltage: 2V max.) |
|||||
| Ambient illumination | Sunlight: 10,000lx max.; Incandescent lamp: 5,000lx max. | |||||
| Ambient temperature | Operating: -25~+55???, Storage: -40~+70???(with no icing or condensation) | |||||
| Ambient humidity | Operating: 35~85%RH, Storage: 35~95%RH(with no condensation) | |||||
| Insulation resistance | 20MΩ min.(DC500V) | |||||
| Dielectric strength | AC1,000V 50/60Hz 1min | |||||
| Vibration resistance | Destruction | 10~2,000Hz double amplitude for 0.5 hours each in X,Y and Z directions | ||||
| Shock resistance | Destruction | 1000m/s2 3 times each X,Y and Z directions | ||||
| Degree of protection | IEC-IP67 | |||||
| Material | Case | PBT | ||||
| Sensing surface | Modified polyarylate | |||||
| Accessories | M2x14 Nuts, Spring gasket, Flat gasket | |||||
Product Details:
| Usage/Application | Industrial |
| Model Name/Number | T5M-D20NA |
| Brand | Orbital |
| Ambient Temperature | -10 Deg C to 60 Deg C |
| Weight | Approx:88 g |
| Voltage | 12~24V DC |
| Sensing Distance | 200 mm |
| Differential Travel | Max 10% |
| Response Time | 3 ms |
| Leakage Current | 40 mA |
| Light Source | Infrared LED (940nm) |
| Noise Resistance | +-240 V |
| Operating Humidity | 35~85%RH |
Additional Information:
Product Details:
| Usage/Application | Industrial |
| Model Name/Number | T3F-T5NA |
| Brand | Orbital |
| Weight | Approx170 G |
| Ambient Temperature | -25 Deg C To 55 Deg C |
| Voltage | 12~24V DC |
| Sensing Distance | 5 m |
| Response Time | 1.0 ms |
| Degree of Protection | IEC60529 IP66 |
| Vibration Resistance | 10~55Hz |
| Insulation Resistance | 20M |
| Type | T3F-T5N???A | T3F-R2N???A | T3F-R3N???A | T3F-D10N???A | T3F-D30N???A | ||
| Sensing distance | 5m | 2m | 2.5m | 100mm | 300mm | ||
| Sensing object | Opaque materals:11mm min. | Opaque materals:56mm min. | White paper???100x100mm | ||||
| Voltage | 12~24V DC pulse(P-P)±10% max. | ||||||
| Leakage current | 45mA max. | 25mA max. | |||||
| Differential travel | - | 20% max. of sensing distance | |||||
| Response time | 1.0ms max. | ||||||
| Sensitivity adjustment | - | Yes | |||||
| Control output | Load power supply voltage???26.4V DC max.; Load current???100mA max.(Load current with a residual voltage???1V max.) | ||||||
| Light source(wavelength) | Infrared LED | ||||||
| Ambient illumination | Receiver side Incandescent lamp???3,000lx max. | ||||||
| Ambient temperature | Operating:-25~+55???, Storage:-30~+70??? (with no icing or condensation) | ||||||
| Ambient humidity | Operating:45~85%RH, Storage:35~95%RH(with no condensation) | ||||||
| Insulation resistance | 20MΩ min.(DC500V) | ||||||
| Dielectric strength | AC1,000V 50/60Hz 1min | ||||||
| Vibration resistance | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | ||||||
| Shock resistance | Destruction | 500m/s2 3 times each X,Y and Z directions | |||||
| Degree of protection | IEC60529 IP66 | ||||||
| Material | Case | ABS | |||||
| Sensing surface | Methacrylic resin | ||||||
| Weight | Approx:170g | Approx:85g | |||||
| Accessories | Nuts | Nuts, Reflector | |||||
Product Details:
| Usage/Application | Industrial |
| Material | ABS |
| Model Name/Number | T4Z-T10N |
| Brand | Orbital |
| Operating Temperature | -25 Deg C To 55 Deg C |
| Voltage | 12~24V DC |
| Weight | Approx:120 g |
| Sensing Distance | 8 m |
| Response Time | 1.0 ms |
| Light Source | Infrared LED |
| Degree of Protection | IEC-IP67 |
| Type | T4Z-T10N | T4Z-R2N | T4Z-D10N | T4Z-D60N | ||
| Sensing distance | 8m | 2m | 180~250mm(100x100mm) | 450mm(300x300mm) | ||
| Standard sensing object | Opaque materals:12mm min. | Opaque materals:75mm min. | - | |||
| Differential travel | - | 20% max. of sensing distance | ||||
| Directional angle | 3~15° | 2~10° | - | |||
| Voltage | 12~24V DC pulse(P-P)±10% max. | |||||
| Current consumption | Emitter:15mA Receiver:20mA | 30mA max. | ||||
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection | Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection | ||||
| Response time | 1.0ms max. | 2.0ms max. | 1.0ms max. | |||
| Control output | Load power supply voltage???26.4V DC max.; Load current???100mA max. (Load current with a residual voltage???1V max.) | |||||
| Light source(wavelength) | Infrared LED | |||||
| Ambient illumination | Sunlight???10,000lx max.???Incandescent lamp???3,000lx max. | |||||
| Ambient temperature | Operating:-25~+55???, Storage:-40~+70??? (with no icing or condensation) | |||||
| Ambient humidity | Operating:35~85%RH, Storage:35~95%RH (with no condensation) | |||||
| Insulation resistance | 20MΩ min.(DC500V) | |||||
| Dielectric strength | AC1,000V 50/60Hz 1min | |||||
| Vibration resistance | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | |||||
| Shock resistance | Destruction | 500m/s2 3 times each X,Y and Z directions | ||||
| Degree of protection | IEC-IP67 | |||||
| Material | Case | PBT | ||||
| Sensing surface | Modified polyarylate | |||||
| Weight | Approx:120g | sApprox:65g | ||||
| Accessories | - | Reflector | ||||
Product Details:
| Usage/Application | Industrial |
| Material | ABS |
| Model Name/Number | ZL-B05N |
| Brand | Orbital |
| Light Source | RED LED (660 mm) |
| Sensing Distance | 2-40 mm |
| Spot Diameter | About 3 mm |
| Reaction Time | Less than 1 ms |
| Consumption Current | Lower than 15 mA |
| Size | 31.4 X 11.4 X 21 mm |
| Type | NPN | PNP | |
| Model | ZL-B05N | ZL-B05P | |
| Light source | RED LED (660mm) | ||
| Sensing distance | 2-40mm | ||
| Spot diameter | About 3mm (at 40mm detection distance) | ||
| Repeatability accuracy | Along the detection axis: less than 1 mm, perpendicular to the detection axis: less than 0.3 mm | ||
| Supply voltage | 12-24 VDC ± 10%, ripple voltage (P-P): maximum 10% | ||
| Indicator light | Red (Output Indicator), Green (Stability Indicator) | ||
| Output mode | LIGHT-ON/DARK-ON (Wiring options) | ||
| Reaction time | Less than 1ms | ||
| Consumption current | Lower than 15mA | ||
| Control output | NPN | NPN collector open circuit 24V; maximum output current: 50mA; residual voltage 1V or lower | |
| PNP | PNP collector open circuit 24V; maximum output current: 50mA; residual voltage 1V or Lower | ||
| Protection circuit | Inverse Electrode Protection (Power Supply), Overcurrent Protection (Output) | ||
| Ambient tolerance | Brightness | Incandescent lamp: illumination below 30001x | |
| Temperature | -20°C to +55°C, No freezing | ||
| Humidity | 35 to 85%RH, No condensation | ||
| Vibration | 10 to 55 Hz, compound amplitude 1.5 mm, X, Y, Z axis direction each 2 hours | ||
| Shock | 500m/s, X.Y.Z axis direction each three times | ||
| Shell material | PBT (polyethylene terephthalate) | ||
| Size | 31.4mm (H) *11.4mm (W) *21mm (D) | ||
Product Details:
| Brand | Orbital |
| Supply Voltage | 10-30VDC |
| Model Number | UF-FB3ON |
| Detection Distance | 2-30 mm |
| Light Source | Red LED |
| Reaction Time | Max 1 ms |
| Current Consumption | 19 mA |
| Shape | Flat type | ||
| Model | NPN | UF-FB3ON | UF-FB3OB |
| PNP | UF-FB3OP | UF-FB30BP | |
| Type | Reflection type | ||
| Detection distance | 2-30mm | 2-40mm | |
| Light point diameter | about φ5mm (when 30m) |
||
| Light source | Red LED | Infrared | |
| Reaction time | Max. 1 ms | ||
| Operation mode (output) | LIGHT-ON / DARK-ON | ||
| Indicator light | Output: red; Stable operation: green; Transmitters power supply: Green | ||
| Supply voltage | 10-30VDC with ripple current (P-P) 10% | ||
| Current consumption | 19mA | 19mA | |
| Control output general purpose) |
NPN output type: NPN collector open 30VDC below, 50mA below; The residual voltage is less than 10mA, less than 1.5V at 10-30mA and less than 2.0V at 30-50mA. Leakage current: the load resistance is 3K0, less than 0.3mA, the load resistance is 1K, less than 0.5mA, and the load resistance is 0.2K, less than 1.5mA |
||
Product Details:
| Usage/Application | Industrial |
| Model Name/Number | ZL-D50N |
| Brand | Orbital |
| Detection Distance | 500 mm |
| Power Voltage | 12-24V DC |
| Light Source | Red LED |
| Reaction Time | 3ms |
| IP Protection | IP67 |
| Size | 21mm (L) X 11.4mm (W) X 32mm (H) mm |
| Current Consumption | 20mA |
| Type | Reflection type | Through beam type | Through beam type | Diffuse reflection type | ||
| Model | NPN | ZL-D50N | ZL-T10N | ZL-R20N | UL-T21N | UL-D21N |
| PNP | ZL-D5OP | ZL-T1OP | ZL-R20P | UL-T21P | UL-D21P | |
| Detection distance | 500mm | 10m | 2m | 1.5m | 100mm | |
| Detected object | 200X200mm white paper | φ10mm opaque object | 45X45mm opaque object | φ4mm opaque object | 200X200mm white paper | |
| Light source | Red LED | Infrared LED | 940nm infrared LED | |||
| Power voltage | 12-24V DC±10%, Class2 | 12-24V DC | ||||
| Connection type | - | 3 cores cable φ2.5mm | ||||
| sensitivity modulation | one circle knob adjustable (230°) | one button setting | ||||
| Control output | NPN cdector open circuit 24V, max. 100mA; PNP collector open circuit 24V, max. 100mA | - | ||||
| Working mode | L-ON/D-ON (Selectable when wiring) | - | ||||
| reaction time | max.3ms | |||||
| Current consumption | max.20mA | |||||
| IP protection level | IP67 | |||||
| Circuit protection | Reverse protection, short circuit protection | |||||
| Ambient Light | Filment lamp: maximum 5,000lux, daylight: maximum 2,0000lux | |||||
| Ambient temperature / ambient humidity | -20 °C to +55 °C, no freezing / 35 to 85% relative humidity | |||||
| Size | 21mm (L) X 11.4mm (W) X 32mm (H) | - | ||||
Product Details:
| Brand | Orbital |
| Model Name/Number | HK-S01 |
| Sesing Distance | 4 mm |
| Variable Range | 5 mm |
| Display Accuracy | 5 um |
| Mechanical Life | More than 10 million times |
| Measuring Force | About 0.7N |
| Protection Level | IP40 |
| TYPE | NPN | PNP | |
| Model | HK-S01N | HK-S01P | |
| Display range | -29.999???29.999 | ||
| Display resolution | 5um | ||
| Response time | 10ms,50ms,100ms,500ms,1000ms | ||
| Power voltage | 12-30 VDC includes 10% pulsation (P-P), CLass 2 | ||
| Consumption current | Maximum 2200 MW (30V, Max. 73.3mA) | ||
| Output control | NPN collector open circuit 40V, max. 50mA; residual voltage: Max.1V | PNP collector open circuit 30V, max.50mA; residual voltage: max.1V | |
| Input control | Input time: minimum 10 ms | ||
| Reaction time | Less than 1ms | ||
| Consumption current | 15mA below | ||
| Ambient | temperature | -10??? to +50???,No freezing | |
| humidity | 35 to 85%RH,No condensation | ||
| shock | 10 to 55 Hz, compound amplitude 1.5 mm, X, Y, Z axis direction each 2 hours | ||
| Material | Shell | Polycarbonate (PC) | |
| Key | Polycarbonate (PC) | ||
| Weigh | About 140 g (including power cord) | ||
| Model | HK-L05 | HK-L10 | ||
| Sesing distance | 4mm | 10mm | ||
| Variable range | 5mm | 10mm | ||
| Display accuracy | 5um | 5um | ||
| Measuring Force | about 0.7N | about 0.6N | ||
| Protection level | sensor head | IP65 | IP50 | |
| amplifier | IP40 | |||
| Mechanical life | More than 10 million times | |||
| Ambient temperature range | Working:0~+50???, saving:-10~+60??? | |||
| Ambient humidity range | Working: 35 to 85% RH, no condensation | |||
| Vibration (durability) | 10 to 55 Hz, single amplitude 0.35 mm, X, Y, Z axis direction 50 min each | |||
| Impact (durability) | 150 m/s2 6 directions,each 3 times(up and down, left and right, front and back) | |||
| Connection mode | Connector relay type (sensor head-preamplifier: 2m preamplifier-connector: 0.2m) | |||
| Weight (after packing) | About: 100g | |||
| Shell material | sensor head | Stainless steel | ||
| sheath | Viton | |||
| Mounting bracket | Stainless steel | |||
| Stator | Ultra steel | |||
| Accessory | Preamplifier mounting bracket right angle adapter | |||
Product Details:
| Brand | Orbital |
| Current Consumption | 19mA |
| Model Number | UF-FB3ON |
| Detection Distance | 2-30 mm |
| Light Source | Red LED |
| Reaction Time | Max. 1 ms |
| Voltage | 10-30VDC |
| Shape | Flat type | ||
| Model | NPN | UF-FB3ON | UF-FB3OB |
| PNP | UF-FB3OP | UF-FB30BP | |
| Type | Reflection type | ||
| Detection distance | 2-30mm | 2-40mm | |
| Light point diameter | about φ5mm (when 30m) |
||
| Light source | Red LED | Infrared | |
| Reaction time | Max. 1 ms | ||
| Operation mode (output) | LIGHT-ON / DARK-ON | ||
| Indicator light | Output: red; Stable operation: green; Transmitters power supply: Green | ||
| Supply voltage | 10-30VDC with ripple current (P-P) 10% | ||
| Current consumption | 19mA | 19mA | |
| Control output general purpose) |
NPN output type: NPN collector open 30VDC below, 50mA below; The residual voltage is less than 10mA, less than 1.5V at 10-30mA and less than 2.0V at 30-50mA. Leakage current: the load resistance is 3K0, less than 0.3mA, the load resistance is 1K, less than 0.5mA, and the load resistance is 0.2K, less than 1.5mA |
||
Product Details:
| Brand | Orbital |
| Voltage | 12~24V DC |
| Sensing Height | 140 mm |
| Sensing Range | 4 m |
| Beam Pitch | 20 mm |
| Degree of Protection | IEC-IP40 |
| Weight | Approx 350g |
| Ambient Humidity | 35~85%RH |
| Number of Optical axis | 8 Optical axis | 12 Optical axis | 16 Optical axis | |||||
| Type | T6N-XN8 | T6N-XN12 | T6N-XN16 | |||||
| T6N-XP8 | T6N-XP12 | T6N-XP16 | ||||||
| Sensing height | 140mm | 220mm | 300mm | |||||
| Sensing object | Opaque object:φ30mm min. | |||||||
| Sensing range | 4m | |||||||
| Beam pitch | 20mm | |||||||
| Voltage | 12~24V DC pulse(P-P)±10% max. | |||||||
| Current consumption | Emitter | Job indicator ON | 0.7W max. | 0.8W max. | 0.9W max. | |||
| Job indicator OFF | 0.6W max. | 0.7W max. | 0.8W max. | |||||
| Receiver | Job indicator ON | 0.7W max. | 0.8W max. | 0.9W max. | ||||
| Job indicator OFF | 0.6W max. | 0.7W max. | 0.8W max. | |||||
| Output | (NPN) NPN Open-colletector transistor - Maximun sink current???100mA - Applied voltage???30V DC max. (between output and 0V) - Residual voltage??? 1V max.(sink current???100mA) 0.4V max.(sink current???16mA) | (PNP) PNP Open-colletector transistor - Maximun sink current???100mA - Applied voltage???30V DC max. (between output and +V) - Residual voltage??? 1V max.(sink current???100mA) 0.4V max.(sink current???16mA) | ||||||
| Output operation | ON when all Optical axis are received(OFF when one or more Optical axis are interrupted) | |||||||
| Short-circuit protection | Incorporated | |||||||
Product Details:
| Brand | Orbital |
| Model Name/Number | P2S |
| Sensing Distance | 0~1.2 mm |
| Usage/Application | Industrial |
| Voltage | 12~24V DC |
| Max Sensing Distance | 1.5mm+-10% |
| Leakage Current | 15 mA |
| Ambient Temperature | - 25 deg C to 70 Deg C |
| Shock Resistance | 500m/s2 3 times |
| Weight | Approx.70g |
| Type | P2S-F1R5?????? | P2S-F3?????? | P2S-F5?????? | |
| Max sensing distance | 1.5mm±10% | 3mm±10% | 5mm±10% | |
| Sensing distance | 0~1.2mm | 0~2.4mm | 0~4mm | |
| Sensing object | Iron,8x8x1mm | Iron,12x12x1mm | Iron,18x18x1mm | |
| Voltage | 12~24V DC pulse(P-P)10% max. | |||
| Leakage current | 15mA max. | 10mA max. | ||
| Control output | open-collector output 100mA max.(DC30V) | |||
| Differential travel | 10% max. of sensing distance | |||
| Response speed | 1kHz min. | 600Hz min. | 500Hz min. | |
| Protection circuits | Power supply reverse polarity protection,Surge suppressor | |||
| Indicator | Detection indicator(red LED) | |||
| Ambient temperature | Operating/Storage???-25~+70???(with no icing or condensation) | |||
| Ambient humidity | Operating/Storage:35~95%RH(with no condensation) | |||
| Residual voltage | 1V max.(Load current:200mA, Cable length:2m) | 1V max.(Load current:50mA, Cable length:2m) | ||
| Insulation resistance | 50MΩ max.(DC500V) between current -carrying parts and case | |||
| Dielectric strength | AC1000V 50/60Hz 1min between current -carrying parts and case | |||
| Vibration resistance | 10~55Hz 1.5mm 2h double amplitude for 2 hours each in X,Y and Z directions | |||
| Shock resistance | 500m/s2 3 times each X,Y and Z directions | |||
| Degree of protection | IEC-IP67 | |||
| Material | Case | Heat-resistant ABS | ||
| Sensing surface | Heat-resistant ABS | |||
| Weight | Approx.70g | Approx.70g | Approx.80g | |
| Accessories | Mounting Bracket | |||
Product Details:
| Brand | Orbital |
| Sensing Distance | 0~4 mm |
| Standard sensing object | Iron,15x15x1 mm |
| Control output | Max 200 mA |
| Max Sensing Distance | 5 mm+-10% |
| Leakage Current | Max 10 mA |
| Response Speed | Max 500 Hz |
| Ambient Temperature | -25+70 Deg C |
| Degree of Protection | IEC-IP67 |
| Weight | Approx.13g |
| Type | P4F-H5NA | P4F-H5PA | P4F-H5NB | P4F-H5PB |
| Max sensing distance | 5mm±10% | |||
| Sensing distance | 0~4mm | |||
| Sensing object | Iron,15x15x1mm | |||
| Voltage | 12~24V DC pulse(P-P)10% max. | |||
| Leakage current | 10mA max. | |||
| Control output | 200mA max.(DC30V) | |||
| Differential travel | 10% max. of sensing distance | |||
| Response speed | 500Hz max. | |||
| Protection circuits | Surge suppressor,output load short-circuit protection,power supply reverse polarity protection | |||
| Indicator | Operation indicator(Orange LED) | |||
| Ambient temperature | Operating:-25~+70???, Storage???-30~+80???(with no icing or condensation) | |||
| Ambient humidity | Operating/Storage:35~95%RH(with no condensation) | |||
| Residual voltage | 3V max.(Cable length:2m) | |||
| Insulation resistance | 50MΩ max.(DC250V) between current -carrying parts and case | |||
| Dielectric strength | AC1000V 1min between current -carrying parts and case | |||
| Vibration resistance | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | |||
| Shock resistance | 1000m/s2, 3 times each X,Y and Z directions | |||
| Degree of protection | IEC-IP67 | |||
| Material | Case: PAR | |||
| Weight | Approx.13g | |||
Product Details:
| Usage/Application | Industrial |
| Weight | Approx.190g |
| Frequency | 50/60Hz |
| Voltage | 100~220V AC |
| Brand | Orbital |
| Max Sensing Distance | 5mm+-10% |
| Sensing Distance | 0~4mm |
| Leakage Current | 15 mA |
| Control Output | 10~200mA |
| Response Speed | 10Hz |
| Ambient Temperature | 20 Deg C to 70 Deg C |
| Degree of Protection | IEC-IP67 |
| Type | P3S-B5K??? | P3S-C10K??? | P3S-D20K??? | |
| Max sensing distance | 5mm±10% | 10mm±10% | 20mm±10% | |
| Sensing distance | 0~4mm | 0~8mm | 0~16mm | |
| Sensing object | Iron,30x30x1mm | Iron,40x40x1mm | Iron,50x50x1mm | |
| Type | P3S-A5?????? | P3S-B5N??? | P3S-C10N??? | P3S-D20N??? | |
| Max sensing distance | 5mm±10% | 5mm±10% | 10mm±10% | 20mm±10% | |
| Sensing distance | 0~4mm | 0~4mm | 0~8mm | 0~16mm | |
| Sensing object | Iron,15x15x1mm | Iron,30x30x1mm | Iron,40x40x1mm | Iron,50x50x1mm | |
| Voltage | 12~24V DC pulse(P-P)10% max. | ||||
| Leakage current | 10mA max. | 15mA max. | |||
| Control output | open-collector output 50mA max.(DC30V max.) | open-collector output 100mA max.(DC12V) 200mA max(DC24V) | |||
| Differential travel | 10% max. of sensing distance | 15% max. of sensing distance | |||
| Response speed | 500Hz | 500Hz | 500Hz | 40Hz | |
| Protection circuits | Power supply reverse polarity protection,Surge suppressor | ||||
| Indicator | Detection indicator(red LED) | ||||
| Ambient temperature | Operating/Storage???-25~+70???(with no icing or condensation) | ||||
| Ambient humidity | Operating/Storage:35~95%RH( with no condensation) | ||||
| Residual voltage | 1V max.(Load current:50mA, Cable length:2m) | ||||
| Insulation resistance | 5MΩ max.(DC500V) between current -carrying parts and case | 50MΩ max.(DC500V) between current -carrying parts and case | |||
| Dielectric strength | AC500V 50/60Hz 1min between current -carrying parts and case | AC1000V 50/60Hz 1min between current -carrying parts and case | |||
| Vibration resistance | 10~55Hz 1.5mm 2h double amplitude for 2 hours each in X,Y and Z directions | ||||
| Shock resistance | 200m/s2 10 times each X,Y and Z directions | 500m/s2 3 times each X,Y and Z directions | |||
| Degree of protection | IEC-IP67 | ||||
| Material | Case | ABS Heat-resistant ABS | |||
| Sensing surface | ABS Heat-resistant ABS | ||||
| Weight | Approx.90g | Approx.190g | Approx.240g | Approx.340g | |
| Accessories | - | Mounting Bracket | |||
Product Details:
| Brand | Orbital |
| Model Name/Number | EA5 |
| Usage/Application | Industrial |
| Standard sensing object | Iron, 5x5mm |
| Control output | Max 200 mA |
| Voltage | 10.8~30V DC |
| Leakage Current | Max 12mA |
| Response Speed | 1.2 kHz |
| Ambient Temperature | -25 Deg C to 80 Deg C |
| Ambient Humidity | 35~95%RH |
| Degree of Protection | IP67 |
| Weight | Approx.36 G |
| Item | Size | φ3 | φ3.8 | φ5.4 | φ8 | M10 | M14 |
| Type | EA5-03BR6???A | EA5-038BR8???A | EA5-054B1R2???A | EA5-08B2???A | EA5-M10B2???A | EA5-M14B4???A | |
| Standard sensing object | Iron, 5x5mm | Iron, 5x5mm | Iron, 6x6mm | Iron, 10x10mm | Iron, 10x10mm | Iron, 15x15mm | |
| Sensing object | Metal | ||||||
| Voltage | 10.8~30V DC | ||||||
| Leakage current | 12mA max. | ||||||
| Control output | 200mA max. | ||||||
| Differential travel | 10% max. of sensing distance | ||||||
| Response speed | 1.2kHz | ||||||
| Indicator | Operation indicator(red LED) | ||||||
| Ambient temperature | -25~+80???(with no icing) | ||||||
| Ambient humidity | Operating/Storage:35~95%RH | ||||||
| Residual voltage | 1V max.(Load current:200mA, Cable length:2m) | ||||||
| Degree of protection | IP67 | ||||||
| Case material | Stainless steel | ||||||
| Weight | Approx.36g | Approx.38g | Approx.40g | Approx.42g | Approx.50g | Approx.60g | |
| Accessories | Plastic stent | ||||||
Product Details:
| Brand | Orbital |
| Usage/Application | Industrial |
| Voltage | 12~24V DC +- 10% |
| Max Sensing Distance | 2.5mm+-20% |
| Leakage Current | Max 15 mA |
| Response Speed | Max 1.3 kHz |
| Residual Voltage | Max 1V |
| Degree of Protection | IEC-IP67 |
| Weight | Approx.13g |
| Ambient Humidity | 35~95%RH |
| Type | P4S-F2N??? | P4S-H2M??? | P4S-F4NA | |
| Max sensing distance | 2.5mm±20% | 2.5mm±20% | 4mm±20% | |
| Sensing distance | 0~1.8mm | 0~1.8mm | 0~3mm | |
| Sensing object | Iron, 15x15x1mm | Iron, 15x15x1mm | Iron, 20x20x1mm | |
| Voltage | 12~24V DC ± 10% | |||
| Leakage current | 15mA max. | 10mA max. | ||
| Control output | NPN open-collector output 100mA max. (DC30V) | |||
| Differential travel | 20% max. of sensing distance | |||
| Response speed | 1.3kHz max. | 1kHz max. | ||
| Protection circuits | Short-circuit protection | - | ||
| Indicator | Operation indicator (Orange LED) | |||
| Ambient temperature | Operating: -25~+70??? Storage??? -30~+80??? (with no icing or condensation) | Operating: -10~+55??? Storage??? -25~+70??? (with no icing or condensation) | ||
| Ambient humidity | Operating/Storage:35~95%RH (with no condensation) | |||
| Residual voltage | 1V max.(Load current:100mA) 0.4V max.(Load current:16mA) | |||
| Insulation resistance | 50MΩ max.(DC250V) between current -carrying parts and case | |||
| Dielectric strength | AC1000V 1min between current -carrying parts and case | |||
| Vibration resistance | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | |||
| Shock resistance | 1000m/s2 3 times each X,Y and Zdirections | |||
| Degree of protection | IEC-IP67 | |||
| Material | Case:PAR | |||
| Weight | Approx.13g | Approx.13g | Approx.20g | |
Product Details:
| Brand | Orbital |
| Usage/Application | Industrial |
| Material | ABS |
| Model Name/Number | T6B-M2CS40 |
| Weight | Approx:65g |
| Voltage | 10~30V DC |
| Sensing Distance | 2 mm |
| Light Source | Infrared LED |
| Current Consumption | Max 40 mA |
| Response Frequency | 10kHz |
| Ambient Humidity | 35~85%RH |
| Insulation Resistance | 20M |
| Degree of Protection | IEC-IP64 |
Product Details:
| Brand | Orbital |
| Model Number | T3X-RN1A |
| Type | Through Beam Sensor |
| Light Source | Infrared LED |
| Interface | RS-232 |
| Switching Frequency | 50 Hz |
| Switching Output | NPN |
| Housing | M8 |
| Housing Material | ABS |
| Degree of Protection | IP67 |
| Operating Temperature | -55 to +125 deg C |
| Type | T3X-R8NA | T3X-R8PA |
| Light source(wavelength) | Red, 4-element LED (625nm) | |
| Voltage | 12~24V DC pulse(P-P)±10% max. | |
| Current consumption | 40mA max. | |
| Power consumption | 480mW max. | |
| Control output | Open-collector output (DC26.4V max.)Load current: 100mA max. Residual voltage: 1V max. | |
| Response time | P-1:200μs???P-2:400μs???P-3:1.6ms???P-4:6.4ms | |
| Timer function | OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ ON-delay timer + One-shot timer, selectable ???Timer duration selectable: 0.1 ms to 9999 ms | |
| Detection mode | Light intensity (area detection possible, automatic sensitivity-tracking function provided) | |
| Display indicator | Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64512; Excess gain: 0P to 999P | |
Product Details:
| Brand | Orbital |
| Usage/Application | Industrial |
| Material | ABS |
| Model Name/Number | T3X-R4NA |
| Voltage | 12~24V DC |
| Current Consumption | Max 40mA |
| Response Time | 200 s |
| Type | T3X-R4NA | T3X-R4PA |
| Light source(wavelength) | Red, 4-element LED (625nm) | |
| Voltage | 12~24V DC pulse(P-P)±10% max. | |
| Current consumption | 40mA max. | |
| Power consumption | 480mW max. | |
| Control output | Open-collector output (DC26.4V max.) Load current: 100mA max., Residual voltage: 1V max. | |
| Response time | 200μs(FINE)/400μs(TURBO)/0.8ms(SUPER) | |
| Delay function | OFF, Delay: 10ms???40ms (Fixed) | |
| Protection circuits | Power supply and control output reverse polarity protection,Output short-circuit protection | |
Product Details:
| Brand | Orbital |
| Usage/Application | Industrial |
| Model Name/Number | CS-400N |
| Reaction Time | 0.5 MS |
| Detection Accuracy | 0.05 mm |
| Detection Range | 6 mm |
| Voltage Input | DC10-30V |
| Output Singal | 0 5V / two switching signal |
This ultrosonatic sensor is based on the principle of linear propagation of high frequency ultrasound. It is used to detect the edge position of coil. Compared with optoelectronic sensor, it is not affected by material transparency, so it is very convenient to use without adjusting. It is suitable for edge-tracing applications of non-permeable materials (such as plastic film, paper, etc.). Not suitable for air permeable materials (such as cloth, non-woven fabrics, etc.)
Product Details:
| Brand | Orbital |
| Switching Output | NPN |
| Sensing Distance | 18 to 28mm |
| Response time | Below 200ps |
| Connection Type | Cable |
| Supply Voltage | 12 to 24 V DC |
| Degree of Protection | IP67 |
| Model Number | EB-S11 |
| Weight | about 104g |
Product Details:
| Brand | Orbital |
| Usage/Application | Industrial |
| Model Name/Number | EB-C1 |
| Supply Voltage | 12 to 24VDC+-10% |
| Weight | About 170 g |
| Current Consumption | Max. 75mA |
| Ambient Brightness | Max.5,000 lux |
| Reaction Speed | Max.500s |
| Amplifier model |
NPN | EB-C1 | EB-C1S |
| PNP | EB-C1P | EB-C1SP | |
| Light source | Red LED???Green LED???Blue LED | ||
| Reation time | 200μs(HSP)/1ms(FINE) | 200μs | |
| Indicator | Output: Red LED,???External synchronization input:Red LED, Matching rate / received light intensity: LED (green/red) | Output: Red LED, matching rate / receiving light intensity: LED (green/red) | |
| Erro display | Excessive intensity, lack of light intensity, lack of color difference | ||
| Calibration method | Single point / two point calibration | Two point calibratio | |
| Error value adjustment | Digital display number setting | ||
| Differential identification model | Mode C / mode C+I / mode I | Mode C+I | |
| Timing function | Timer OFF/ON delay/OFF delay/Single shot | ||
| Output selection | Match output: when target color meets record connect. Mismatch output: when the target color is different from the record color, connect it | ||
| External synchronization input | Reaction speed: max.500μs | N/A | |
| External calibration input | Input reaction time: minimum 20ms | N/A | |
| Record color selection | Database selection (external input or key operation), no voltage input. | N/A | |
| Control output | NPN (PNP): Max 40VDC max (100mA), residual voltage: Max 1.0V | ||
| Circuit protection | Reverse electrode protection (power supply), over current protection (output), and over voltage (output). | ||
| Power Supply | 12 to 24VDC±10%, Pulse voltage (P-P): maximum 10% | ||
| Current consumption | Max. 75mA | ||
| Ambient brightness | filament lamp: Max.5,000lux, sunlight: max.10,000lux | ||
| Case material | polycarbonate | ||
| Weight(with 2m cable) | about 170g | ||
Product Details:
| Brand | idec |
| IP Rating | 65 |
| Dielectric Resistance | 1000 VAC |
| Operating Temperature | -18 Deg C to 50 Deg C |
| Current | 1.0 amps |
| Voltage | 24 VAC |
Product Details:
| Brand | IDEC |
| Current Rating | 10 A |
| IP Rating | IP65 |
| Voltage | 24VDC |
| Material | HDPE |
Contact detection type switches provided with cushioning characteristics which prevent damage to the contacted object.
Features:
Product Details:
| Brand | Orbital |
| Sensing Distance | 1-16 mm |
| Usage/Application | Industrial |
| Frequency | 150-2000 HZ |
| Size | D6.5, M8, M12, M18, M30 |
| Operating Voltage | 10-30VDC, 20-250VDC, AC/DC |
| Current | 200 mA-400 mA |
| Certificate | CE, ROHS |
Product Details:
| Brand | Orbital |
| Sensing Distance | 1-15 mm |
| Material | Iron |
| Usage/Application | Industrial |
| Protection circuits | IP67 |
| Frequency | 1000 HZ |
| Size | M8, M12, M18, M30 |
| Certificate | CE, ROHS |
| Operating Voltage | 10-30VDC |
| Response Time | 0.1 ms |
Product Details:
| Usage/Application | Industrial |
| Model Name/Number | LA-B12 |
| Brand | Orbital |
| Weight | Approx 330 G |
| Voltage | 12~24V DC |
| Ambient Temperature | -25 Deg C To 55 Deg C |
| Sensing Distance | 5 mm |
| Light Source | Infrared LED (950 mm) |
| Current Consumption | Max 40 mA |
| Response Time | Max 1 ms |
| Power Supply Voltage | 24V DC |
| Load Current | 80 mA |
| Ambient Humidity | 35~85%RH |
| Insulation Resistance | 20 M |
| Vibration Resistance | 10~55 Hz |
| Degree of Protection | IEC-IP67 |
Product Details:
| Model Name/Number | T3V-V18M10NA |
| Brand | Orbital |
| Voltage | 10~30V DC |
| Sensing Distance | 100 mm |
| Light Source | Infrared LED |
| Current Consumption | Max 30 mA |
| Response Time | Max 2 ms |
| Ambient Temperature | -25 Deg C To 55 Deg C |
| Degree of Protection | IEC-IP67 |
| Type | T3V-V18M10NA | T3V-V18M40NA | T3V-V18M80NA | ||
| T3V-V18M10PA | T3V-V18M40PA | T3V-V18M80PA | |||
| Sensing distance | 100mm | 400mm | 800mm | ||
| Light source | Infrared LED | ||||
| Voltage | 10~30V DC pulse(P-P)±10% max. | ||||
| Current consumption | 30mA max. | ||||
| Response time | 2ms max. | ||||
| Control output | Load power supply voltage???30V DC max.; Load current???100mA max. (Load current with a residual voltage???1.5V max.) Light-ON/Dark-ON mode selector |
||||
| Protection circuits | Power supply reverse polarity, Output short-circuit protection | ||||
| Ambient illumination | Sunlight???10,000lx???Incandescent lamp???3,000lx | ||||
| Ambient temperature | Operating:-25~+55???, Storage:-40~+70??? (with no icing or condensation) | ||||
| Ambient humidity | Operating:35~85%RH, Storage:35~95%RH (with no condensation) | ||||
| Insulation resistance | 20MΩ min.(DC500V) | ||||
| Dielectric strength | AC1,000V 50/60Hz 1min | ||||
| Vibration resistance | Destruction | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | |||
| Shock resistance | Destruction | 500m/s2 10 times each X,Y and Z directions | |||
| Degree of protection | IEC-IP67 | ||||
| Material | Case | Nickel-plated brass | |||
| Lens | PMMA | ||||
Product Details:
| Sensing Distance | 2 mm |
| Voltage | 10~30V DC |
| Response Frequency | 10kHz |
| Current Consumption | 40mA |
| Degree of Protection | IEC-IP64 |
Product Details:
| Brand | IDEC |
| Usage/Application | Industrial |
| Contact Material | MS |
| IP Rating | 65 |
| Ambient Temperature | -20 Deg C to 55 Deg C |
Mat switches with excellent reliability and durability covering a wide range of models from standard to custom products.