IDEC Relays And Timer

Product Details:

IDEC interface relays provide a compact solution for general purpose relay requirements. The RV8 series interface relays are ideal for PLC and other controller output, industrial automation, panel builders, assembly machine applications and other applications that require a high switching capability in a compact space. The RV8 relays can be used as a universal interfaces between the controller and the actuator to switch small and medium size loads. Installation time is greatly reduced with pre-assembled relays and sockets – with either screw connections or spring clamp terminations. Replacement relays and sockets are also available. Optional accessories include jumpers, spacers and marking plates to facilitate wiring and quick identifications. The primary versions available are:

Product Details:

Force-guided relays are key electromechanical switching components, providing a failsafe within safety circuits and detecting failures such as contact welding or damage to the contact spring failure. Often used in combination with elevator controls, interlock switches, light curtains and emergency stop switches, these relays are crucial in safety control applications. Available as a plug-in (RF2S) or pc board (RF2V), RF2 force-guided relays are ideal if you only need two contacts or if you want to add multiple relays in a series. In combination with the SJ series of finger-safe sockets, these compact relays provide reliable safety for man and machine in the event of a malfunction, while cutting down on cost and installation space.


Features:

• Compact and slim
• Built-in LED indicator
• RTIII degree of protection
• Socket and PC board mounting
• 2-pole, 6A contacts
• Force guided contact mechanism (EN50205)
• Fast response time
• High shock resistance
• Compatible with finger-safe SJ series sockets

Product Details:

Featuring the same contact ratings as the larger RR series, the RH series uses silver cadmium oxide contacts to help reduce voltage arcing. Available in 1 to 4 poles, with either .187 blade plug-in or PCB terminals, the RH series is known for going the distance. Options include manual check buttons, LED indicators, and top flange covers for direct surface mounting. All models carry worldwide approvals including UL, CSA, TUV and CE. Using a standard terminal arrangement, the RH series will plug into many competitors' sockets. In fact, since we private label sockets for so many companies, there is a good chance that the socket you are using was designed specifically for RH series relays.


Features:

• Compact midget size saves space
• SPDT, DPDT, 3PDT, or 4PDT AgCdO contacts
• High switching capacity (10A)
• Choice of Plug-In or PCB type terminals
• Options include indicator light and check button
• Mounting options include top mounting, DIN socket, or panel mount socket

Product Details:

The adaptable RU series are available in either 2 pole (DPDT) or 4 pole (4DPDT) models. Both RU2 and RU4 models have multiple standard features, including a non-polarized green indicator LED, a mechanical indicator flag, an easily accessible and replaceable marking plate, and a manual latching lever, coded orange/red for AC coil and green/blue for DC coil.What sets the RU relays apart from other relays is the unique internal construction. There is no internal wiring, which means no weak solder points and a completely lead-free manufacturing process. The contacts are cadmium-free as well, making the RU relays environmentally-friendly. All RU relays are also manufactured by a totally automated assembly process which means the relay is of the highest quality because the possibility of human error has been eliminated during the manufacturing process.


Features:

• RU2: DPDT, 10A (250V AC/30V DC)
• RU4: 4PDT, 6A (250V AC/30V DC)
• RU42: 4PDT bifurcated 3A (250V AC/30V DC) for dry contact circuits
• Quality design - solder free construction (lead free)
• Latching & momentary check button levers
• Non-polarized green indicator
• LED & mechanical indicator flag standard
• AC/DC color coded manual latching levers
• Snap-on marking plates available in yellow (standard color), green, orange, blue or white for easy labeling & identification
• Available in 12V, 24V, or 110V DC; 24V, 110-120V, 220-240V AC operating coils 

Product Details:

RR series relays provide reliable switching for industrial loads. Using pure silver contacts, they are rated up to 10A and 240V AC. Terminals are available in two styles, 8 or 11 pin tubular (octal) or .187 plug-in. Coil voltages range from 6VDC to 240VAC.Carrying worldwide approvals including UL, CSA, TUV and CE marking (TUV and CE on tubular pin types only), they are ready to travel anywhere your application needs take them. Available options include manual check buttons, LED indicators, or side flange covers for direct surface mounting. When coupled with IDEC's high quality sockets, they form an unbeatable combination..


Features:

• High reliability and long service life
• SPDT, DPDT, or 3PDT pure silver contacts
• Available with octal (8-pin and 11-pin) or .187in blade plug-in terminals
• Worldwide approvals on octal (8-pin and 11-pin) models: UL, CSA, TUV, CE
• Options include check button for test operation and indicator light
• Mounting options include flange mounting, DIN socket, or panel mount socket

Product Details:

This compact and powerful SmartRelay now equipped with features that comparable to a micro PLC. Standard features such as universal voltage, built-in analog inputs, real time clock, 10 Amp relays outputs, that imprinted with IDEC SmartRelay, now we’ve even added more features: Ethernet port, micro SD port, Networking, Web Server functions, iOS and Android Apps support, Modbus TCP Client/Server, Access Tool for Microsoft Excel, Web Page Editor, and the ability to support -10 to 55 degree C operating temperature.The new FL1F SmartRelay CPU base module comes standard with embedded RJ45 Ethernet port. Program can be remotely monitor, download and upload using this port. Special programming cable is no longer required. Using standard web browser, users can easily monitor and control the SmartRelay. Program storage and transfer is never easier with the embedded Micro SD port. Special memory cartridge is no longer required. This makes it easier for OEM to update and manage programs. Data logging is also supported. Need to monitor and control the SmartRelay from a smart phone and tablet? No problem. A new SmartRelay Apps will be available in December for all iOS and Android devices. Additional enhancements including ability to network up to 16 SmartRelay over Ethernet network, an improved LCD display, and improved Real Time Clock backup with up to 480 hours.Up to 60 I/Os can now be configured with the new digital and analog expansion modules. These new expansion modules are not compatible with the previous SmartRelay models.


Features:

• Embedded RJ45 Ethernet Port
• Micro SD Card
• Data Logging
• Integrated Web Server
• iOS and Android App available
• Modbus TCP Client/Server
• Direct Comm. with Excel
• Web Page Editor

Product Details:

IDEC make RELAY

Product Details:

IDEC make force Guided Relay

Product Details:

Intrinsic Safety Lamp Barriers are essential components of an intrinsically safe application. These devices are to limit the voltage and current to prevent ignition in hazardous areas. 126 different types of pilot lights and buzzers can be connected. Illuminated push buttons and selector switches also can be used with the combination of EB3L lamp and EB3C relay barriers.

Features:

• Zone 0/Class I Division 1 locations
• IEC60079 compliant
• Compact and lightweight (46% footprint and 36% weight compared to IDEC’s 10-circuit IBPL)
• 8- and 16-channel types are available in common wiring types
• Ideal for connection to PLCs. 16-circuit types are also available with a connector
• No grounding required
• IDEC’s original spring-up terminal minimizes wiring time
• Installation, 35-mm-wide DIN rail mounting or direct screw mounting

Product Details:

RJ relays were designed with the same attention-to-detail IDEC is known for. The most recent IDEC innovation is a return spring structure for the RJ relays that eliminates unnecessary weak points improving durability, and increasing electrical conductivity and service life. Available in both Plug-in blade or PCB type, SPDT or DPDT (Form A or Form C) configuration, and up to 16A rated contact, there are no regrets once you design in an RJ relay. Unique light guide to give you a brighter and more noticeable status indicator from multiple directions. Unique return spring structure allows usage for better materials thus higher contact rating. With 3 times the life expectancy of similar units, you worry less about maintenance and replacing relays.

Product Details:

The GT3A timer offer flexible multi-mode/multi-range timers with 5A contacts in octal plug-in format. Time range up to 180 hours. Both power on and momentary input trigger type SPDT and DPDT contact configuration

Product Details:

The RY series of relays satisfy applications for lower level switching needs such as pilot lights or logic level devices. The RY has standard gold plated contacts to prevent contact oxidation from affecting circuit continuity, while optional Palladium alloy bifurcated contacts reduce contact bounce and allow circuit switching in the micro-amp range.Terminated with a standard footprint of blade plug-in terminals or with PCB pins, the RY series fit into many competitors' sockets as well. The RY2 is a true two pole relay that occupies half the width of the four pole. Available options include manual check buttons, LED indicators, or top flanged dust covers for direct surface mounting.


Features;

• DPDT model
• RY Series gold plated contacts standard
• Blade plug-in or PCB terminals
• Options include indicator light, check button, and top mounting bracket
• Mounting options include top mounting, DIN socket, PCB socket, or panel mount socket

Product Details:

IDEC’s RQ relays are low-pro???le, PCB relays that provide quality within a compact package. RQ relays are small, yet maintain high contact ratings and long operational life. For larger power needs, a 16A model is also available.

Product Details:

A miniature latching relay with a 14-pin ice cube base and DPDT contact configuration. Pulse input operation maintains conditions even during power failures. DIN rail, PCB, and panel mount sockets are available for a wide range of mounting applications.


Features:

• Contacts rated 3A/240V AC, 3A/30V DC, Standard ice-cube base, solder lug (14-pin) termination, High vibration and shock resistance, Excellent self-holding performance, Optional dual manual check button for circuit testing, Dual coil permanent magnet, 5A

Product Details:

RJ PCB relays, the newest addition to our relay family, were designed with the same attention-to-detail IDEC is known for. The most recent IDEC innovation is a return spring structure for the RJ PCB relays that eliminates unnecessary weak points improving durability, and increasing electrical conductivity and service life.


Features:

• RJ Slim PCB Relay ideal for space-saving application
• RoHS Complaint (2002/95/EC)

Product Details:

These magnetic latching relays have excellent self-holding performance and operate by pulse input so they maintain conditions even during power failures. They are available in AC and DC coil voltages up to 10A. DIN rail and panel mount sockets are available for a wide range of mounting applications.

Features:

• Contacts reated to 10A/250V AC, 10A/30V DC, Standard octal base (11-pin) termination, Coils rated for continuous duty, High vibration and shock resistance, Optional dual manual check button for circuit testing, Dual coil / permanent magnet, 10A

Product Details:

Single function On-Delay timer with 5A DPDT or 3A 4PDT contacts. Blade plug in type with time ranges up to 60 minutes.

Key Features:

• 4PDT, 3A or DPDT, 5A contacts
• Control settings by hand or screwdriver
• Power ON and timing out LED indicators
• Uses the same sockets and hold-down clips as IDEC’s RU series relays

Product Details:

Features:

• SPDT 5A contacts
• Control settings by hand or screwdriver
• Power ON and timing out LED indicators
• Uses the same sockets and hold down clips as IDEC’s RR2P 8-pin relays

Product Details:

Many small scale applications such as simple machines could benefit by using a programmable graphical interface along with a discrete and analog controller and I/O, but don’t have the panel space or the budget for separate components. The FT1A SmartAXIS Touch address this need by combining operator interface and control in a single compact package, all programmable with IDEC’s PC-based software. The FT1A Touch is available in 12 I/O and 14 I/O configurations with analog I/O expansion capability suitable for advanced analog monitoring and control.

Features:

• Models with 12 or 14 I/O
• Embedded RJ45 Ethernet Port
• Modbus TCP or RTU
• Built-in 2 analog inputs
• Built-in 2 analog outputs
• Optional Analog Cartridges
• PID Controls
• USB Maintenance Port
• Seamless interface with other PLCs
• Class I Div. 2 Hazardous Locations

Product Details:

IDEC GE1A series of timers are simple, yet flexible (ON Delay) time delay relays. It is extremely easy to configure the GE1A for a wide variety of set times and is a perfect fit for the large OEM who wants a simple plug and play timing solution. The GE1A provides delays up to 10 hours, two different contact configurations and are designed to meet most application requirements. With 8 pin octal termination and a variety of accessories, DIN rail, surface or through-panel mounting is available.


Features:

• DPDT or SPDT + instantaneous SPDT, 8-pin octal base, 8 time ranges, Repeat error ±0.2% maximum, Large clear knob for easy setting, Instant monitoring of operational status by LED indicators

Product Details:

Intrinsically Safe Relay Barriers are essential components of intrinsically safe applications. These devices limit current, voltage, & total energy delivered to a sensor or any other actuator instrument located in a hazardous area. When used in areas with hazardous chemicals, gases or other ignitable atmospheres, limiting the energy is required to prevent any possible fires & explosions from occurring. Dry contact switches can be connected to the EB3C. Illuminated switches also can be connected with the combination of the EB3S Relay and the EB3L Lamp Barriers.

Features:

• Zone 0 /Class I Division 1 locations
• IEC60079 compliant
• Dry-contact switches with 0.5Ω maximum contact resistance can be connected to the EB3C
• 8- and 16-circuit types are available in common wiring types
• Ideal for connection to PLCs
• Universal AC power voltage (100 to 240V AC)
• No grounding required
• IDEC’s original spring-up terminals minimizes wiring time
• Installation: 35-mm-wide DIN rail mounting or direct panel mounting
• Global usage USA: FM Canada: CSA Europe: CE marking, ATEX

Product Details:

SU series sockets is used with RU series relay. Featuring a spring-clamp style connection that achieves high contact reliability and vibration resistance regardless of wire size and shape. Stranded wire, single wire, stranded wire with ferrule can be connected easily using a screwdriver.


Features:

• Spring-clamp style connection, Vibration resistance regardless of wire size and shape

Product Details:

Din rail mount relay sockets for RN relays.

Product Details:

IDEC FT1A SmartAXIS controllers were designed with a focus to provide users with unique features and advanced functions for applications that require limited I/O. FT1A SmartAXIS controllers are available 12, 24, 40, and 48 I/O CPUs. The FT1A controllers are equipped with features that you can't find in any other competitors PLCs. 10A relay contacts, integrated analog inputs, embedded smart LCD/keypad, embedded Real-time clock, embedded RJ45 Ethernet port for remote connectivity and Modbus TCP communication, SD memory slot for data logging and many other features at a very competitive price.

Features:

• Embedded RJ45 Ethernet Port
• Modbus TCP and RTU
• Embedded smart LCD/keypad
• Built-in 2-8 analog inputs
• 10A Relay Contacts
• Built-in Real Time Clock
• USB Maintenance Port
• SD Memory for data logging
• Class I Div. 2 HazardousLocations

Product Details:

SF1V series is a slim style sockets for RF1V relay. Available in Din-rail or PCB mount.